Operating voltage: 7.4/ 11.1/ 14.8V - 10 LEDs / 3 modes
Installed on board the model and connected directly to the balance connector of the power battery, consisting of two/three/four lithium-ion or lithium polymer cells. Voltage measurement should be done under load.
After the start of the model, the battery should be disconnected both from this indicator and from other electrical consumers installed on the model (speed controller, WEC system, etc.). Failure to comply with this requirement may lead to deep discharge of the battery and its failure.
Specifications:
10 LEDs / 3 modes
Temperature range: -0...+50°С
Number of tested batteries: 2/ 3/ 4
Working voltage: 7.4/ 11.1/ 14.8 V
Setting accuracy: 0.1 V/cell
Current consumption (no more): 20 mA
Dimensions: 45 x 13 x 9 mm
Weight: 6.5 g
Main | |
Weight (g) | 6,5 |
Dimensions (LхWхH) (mm) | 45 х 13 х 9 |
Supply voltage (V) | 7,4 - 11,1 - 14,8 |
Current (A) | (no more) - 20 mA |
Onboard battery status indicator 2/3/4 Lipo (7.4V 11.1V 14.8V)
- Brand: Украина
- Product Code: 101060
- Availability: In Stock
-
$1.97
Order in 1 click
Related Products
Onboard power status indicator light and sound 3 LiPo
Installed on board the model and connected to the power wires or to the connector of the balancer of..
$4.66
Onboard power status indicator light and sound 2 LiPo
Installed on board the model and connected to the power wires or to the connector of the balancer of..
$4.66
Onboard power status indicator light and sound 4 LiPo
Installed on board the model and connected to the power wires or to the connector of the balancer of..
$4.66
Light and sound indicator with the possibility of power cut (3 LiPo)
This device (cut-off) is a combination of a voltage indicator for a three-cell cell-controlled lithi..
$0.00
Featured
What you need to know about the propeller
How does a propeller work? A propeller converts rotation engine shaft at point blank range - the force pushing the ship forward. When the propeller ro..
Rules for charging and using LiPo batteries
A few REQUIRED rules for charging and using LiPo batteries: 1. Use only a charger designed for lithium batteries. The charger can be designed to ch..