When installing the VEC in the case of the model, it is necessary to ensure the access of cooling air to the device board.

The servo signal passes from the output of the receiver through the device board without conversion.
Since the device is connected after the receiver and is de-energized by the main onboard power switch, it is not required to disconnect it from the receiver and servo during operation.
TECHNICAL SPECIFICATIONS
Input voltage - 5.4...8.4 V
Output voltage - 4.9...5.1 V
Continuous operating current - 1 A
Short-term operating current - 1.5 A
Weight - 5 g
Dimensions (without wires) - 26 x 10 x 6 mm
Temperature range - -10...+40 оС
Number of connected standard servos - 1
Connector Standard (Inlet) - JR-HITEC
Connector Standard (output) - FUTABA
Main | |
Weight (g) | 5 |
Dimensions (LхWхH) (mm) | 26 х 10 х 6 |
Supply voltage (V) | 5,4 - 8,4 |
Current (A) | 1 |
INLINE - BEC 1A / 5V - linear on-board voltage regulator
- Brand: Украина
- Product Code: 052006
- Availability: In Stock
-
$4.29
Order in 1 click
Related Products
On-board linear voltage regulator WEIGHT 5V / 3A (5.8-8.4V)
The stabilizer is designed to power the complex of on-board devices: receiver, servomechanisms, etc...
$8.63
Mini UBEC step-down voltage converter 3A 5V (2-6S)
The mini UBEC voltage converter is used to create a 5V output voltage from a 2-6S battery input volt..
$4.17
Mini UBEC step-down voltage converter 3A 12V (3-6S)
The mini UBEC voltage converter is used to create a 12V output voltage from a 3-6S battery input vol..
$4.17
Tags: voltage stabilizer, BEC
Featured
What you need to know about the propeller
How does a propeller work? A propeller converts rotation engine shaft at point blank range - the force pushing the ship forward. When the propeller ro..
Rules for charging and using LiPo batteries
A few REQUIRED rules for charging and using LiPo batteries: 1. Use only a charger designed for lithium batteries. The charger can be designed to ch..