Reverse travel controller SCR-05H is intended for installation on micro auto (ship) models with class 130-280 engines, for controlling gear motors of miniature robots, as well as for powering pump drives, locators, thrusters.
When installed on the model, the regulator is controlled from the corresponding channel of the remote control equipment. Control and power supply of the signal part of the regulator is carried out via a servo cable.
Power supply of the power part of the regulator is carried out from the running battery. Since the regulator is designed to work with different types of batteries (1-2LiPo, 3-7 NiXX), it does not contain a cutoff for the supply voltage.
The regulator is made using SMD technology using modern power transistors and a microcontroller.
Spark arresting capacitors must be installed on the motor to ensure normal operation of the drive.
It is not recommended to use “toy” motors due to the extremely low quality of their brush-collector group.
In order to avoid failure of the regulator, it is not recommended to make a sharp reversal of the engine (shifting the throttle stick from one extreme position to another). When reversing, it is recommended to hold the throttle stick in neutral for 1...2 seconds.
After starting the model, the regulator must be disconnected from the battery. Do not allow dust or water to enter the regulator.
Weight: 6.0 g
Supply voltage: 3 - 8.4 V
Resistance: 0.06 ohm
Running current (continuous): 5A
Running current (short term): 6A
Temperature range: 0...+40°С
Chip Standard: JR/HITEC
|Dimensions (LхWхH) (mm)||27 х 15 х 5|
|Supply voltage (V)||3 - 8,4|
Reverse speed controller SCR-05H (5A)
- Brand: Украина
- Product Code: 020105
- Availability: In Stock