Installed on board the model and connected to the output of the receiver parallel to the speed controller or to a separate channel mixed with the throttle channel.
The servomechanism connected to the output of this device performs oscillatory movements, which allows organizing the waving movements of the wingtips. The frequency of strokes depends on the position of the throttle.
When the throttle stick is set to the minimum position (the screw does not rotate), the servo is set to neutral.
Also, the wing beat frequency can be controlled from a separate channel, not mixed with the throttle channel. In this case, it is preferable to use a "twist" channel, it is easier for them to set the desired frequency of strokes.
SPECIFICATIONS
Supply voltage: 4.8 ~ 6.0 V
Pulse amplitude: 3.3 V
Pulse swing: 1.25~1.75ms
Sweep frequency: 0.23 ~ 2.5Hz
Temperature range: 0 ~ 40°C
Weight: 3.5 g
Dimensions: 32 x 12 x 4 mm
Connector Standard: JR / HITEC
| Main | |
| Weight (g) | 3,5 |
| Dimensions (LхWхH) (mm) | 32 х 12 х 4 |
| Supply voltage (V) | 4,8 ~ 6 |
Servo - wing beat frequency controller for "Angry Birds" type models
- Brand: Украина
- Product Code: 050060
- Availability: In Stock
-
$0.00
Order in 1 click
Related Products
Servo - Reverser
Installed on board the model and connected between the receiver and the servo. Allows you to change ..
$0.00
Servo-Y-Reverser SRVY-2
The SRVY-2 Servo-Y Reverser is connected between the receiver and two servos. Allows you to change ..
$0.00
Tags: controller, wing beat frequency
Featured
What you need to know about the propeller
How does a propeller work? A propeller converts rotation engine shaft at point blank range - the force pushing the ship forward. When the propeller ro..
Rules for charging and using LiPo batteries
A few REQUIRED rules for charging and using LiPo batteries: 1. Use only a charger designed for lithium batteries. The charger can be designed to ch..