Allows you to increase the working sector of the servo.
Sector stretching is adjusted by rotating the built-in regulator. Adjustment - smooth from 100 to 200% of the initial value of the working sector.
TECHNICAL SPECIFICATIONS
Supply voltage .......... 4.8 - 6.0 V
Pulse amplitude .......... 3.3 V
Duration of input pulse ... 1.0 - 2.0 ms
Exit duration pulse .. 0.5 - 2.5 ms
Temperature range ...... 0...+40°С
Weight ....................... 4.5 g
Dimensions (without wires) ...... 30x11x5 mm
WARNING!
The adjustment should be made only from the minimum value of the regulator adjustment in order to avoid failure of the servomechanism when it hits the mechanical stops.
Before setting up, make sure that the servo gear has a sufficient margin of rotation.
The device must be protected from vibration, as well as from dust, moisture and fuel.
| Main | |
| Weight (g) | 4,5 |
| Dimensions (LхWхH) (mm) | 30 х 11 х 5 |
| Supply voltage (V) | 4,8 - 6,0 |
Servo - Stretcher (increase in the working sector of the servomechanism)
- Brand: Украина
- Product Code: 050070
- Availability: Pre-Order
-
$0.00
Order in 1 click
Related Products
Servo - Reverser
Installed on board the model and connected between the receiver and the servo. Allows you to change ..
$0.00
Servo-Y-Reverser SRVY-2
The SRVY-2 Servo-Y Reverser is connected between the receiver and two servos. Allows you to change ..
$0.00
Featured
What you need to know about the propeller
How does a propeller work? A propeller converts rotation engine shaft at point blank range - the force pushing the ship forward. When the propeller ro..
Rules for charging and using LiPo batteries
A few REQUIRED rules for charging and using LiPo batteries: 1. Use only a charger designed for lithium batteries. The charger can be designed to ch..