The SRVY-2 Servo-Y Reverser is connected between the receiver and two servos.
Allows you to change the direction of processing and adjustment of the neutral position of one servo and the transfer of a constant incoming servo pulse to the second, allowing you to organize their mirror work, which cannot be achieved in other ways.
The device should be protected from vibration, dust, moisture and fuel.
TECHNICAL SPECIFICATIONS
Supply voltage - 4 ~ 9 V
Pulse amplitude - 3.3 V
Pulse duration - 1.0 ~ 2.2 ms
Temperature range - 0 ~ 40°С
Weight - 6.5 g
Dimensions without wires - 30 x 11 x 5 mm
Main | |
Weight (g) | 6.5 |
Dimensions (LхWхH) (mm) | 220 x 10 x 5 |
Supply voltage (V) | 4 ~ 9 |
Servo-Y-Reverser SRVY-2
- Brand: Украина
- Product Code: 050010
- Availability: Pre-Order
-
$0.00
Order in 1 click
Related Products
Servo - Stretcher (increase in the working sector of the servomechanism)
Allows you to increase the working sector of the servo. Sector stretching is adjusted by rotating t..
$0.00
Servo - wing beat frequency controller for "Angry Birds" type models
Installed on board the model and connected to the output of the receiver parallel to the speed contr..
$0.00
Servo - Reverser
Installed on board the model and connected between the receiver and the servo. Allows you to change ..
$0.00
Featured
What you need to know about the propeller
How does a propeller work? A propeller converts rotation engine shaft at point blank range - the force pushing the ship forward. When the propeller ro..
Rules for charging and using LiPo batteries
A few REQUIRED rules for charging and using LiPo batteries: 1. Use only a charger designed for lithium batteries. The charger can be designed to ch..