Installed on board the model and connected between the receiver and the servo. Allows you to change the direction of the servo mechanism to a mirror one.
The use of this device, for example, allows you to organize the mirror operation of two machines connected to the same receiver channel, which cannot be achieved by other methods.
The servo-reverser is manufactured in two versions - with JR/Hitec and Futaba standard.
TECHNICAL SPECIFICATIONS
Supply voltage: 4.8 ~ 6.0V
Pulse amplitude: 3.3V
Pulse Width: 1.0~2.0ms
Temperature range: 0 ~ 40°C
Connector Standard: JR/Hitec
Product class: HOBBY
Weight: 5 g
Length: 180~220mm
Main | |
Weight (g) | 5 |
Dimensions (LхWхH) (mm) | 220 x 10 x 5 |
Supply voltage (V) | 4,8 ~ 6,0 |
Servo - Reverser
- Brand: Украина
- Product Code: 050001
- Availability: In Stock
-
$0.00
Order in 1 click
Related Products
Servo - Stretcher (increase in the working sector of the servomechanism)
Allows you to increase the working sector of the servo. Sector stretching is adjusted by rotating t..
$0.00
Servo - wing beat frequency controller for "Angry Birds" type models
Installed on board the model and connected to the output of the receiver parallel to the speed contr..
$0.00
Servo-Y-Reverser SRVY-2
The SRVY-2 Servo-Y Reverser is connected between the receiver and two servos. Allows you to change ..
$0.00
Featured
What you need to know about the propeller
How does a propeller work? A propeller converts rotation engine shaft at point blank range - the force pushing the ship forward. When the propeller ro..
Rules for charging and using LiPo batteries
A few REQUIRED rules for charging and using LiPo batteries: 1. Use only a charger designed for lithium batteries. The charger can be designed to ch..