The governor module is installed on small aircraft and marine models with engines up to class 180 and is powered by 1-2 LiPo or 3-6 NiCd batteries via a servo cable from the receiver bus.
The presence of a stabilizer in the circuit allows the option of separate power supply.

The module is manufactured using SMD technology using the most modern power components and a microcontroller. Soldering wires should be done with a grounded soldering iron in accordance with the figure.


To ensure the normal operation of the electric drive, it is necessary to install spark arresting capacitors C1, C2, C3 (0.1 μF 50V) on the motor.
When the power is connected, the controller is deactivated. To turn on (or reactivate) the regulator, move the throttle on the remote control to its lowest position.
After running the model, the regulator should be disconnected from the battery.

SPECIFICATIONS:
Weight: 0.4 g
Dimensions: 15 x 7 x 2.5mm
Supply voltage: 3 ... 9 V
Running current (continuous): 2 A
Running current (30 sec): 3 A
Temperature range: 0 ... 40 ⁰